Print This Page


Proper Boiler Care Makes Good Business Sense:Safety Precautions for Drycleaning Businesses

Print Date: 12/13/2017 9:06:56 AM

John Hoh
National Board Assistant Director of Inspections

Summer 1996  

Category: Incidents 

 

Summary: The following article is a part of National Board Classic Series and it was published in the National Board BULLETIN. (4 printed pages)

 


 

Saturday was cleanup day at the small drycleaner's. Every week, the horizontal return tubular (HRT) boiler was drained, flushed and prepared for the next week's work. This Saturday, however, the boiler operator was interrupted during his final steps. He performed every task except refilling the boiler.

This boiler was set to start automatically early on Monday mornings. The prescribed time arrived; the burner engaged. When the owner arrived to open the business Monday morning, she found the local fire department at her back door and the severely overheated remains of her boiler.

Luckily, there was no explosion, since there was no water in the boiler. Also, firefighters on the scene knew they should never spray water on an overheated boiler, so they closed the gas supply valve on the outside of the building and allowed the boiler to cool gradually. They stayed on-site to prevent any structural fires that might have developed as a result of the overheated boiler.

What happened?

The low-water fuel cutoff should have prevented the burner from engaging, but the electrician improperly wired the control into the burner circuitry. The boiler had been operating in a potentially hazardous manner for several months. Had the owner requested an inspection, the boiler inspector would have tested the operation of the low-water fuel cutoff and, in this case, would have found it inoperable.

The uninsured boiler was a total loss. Both tube sheets had numerous cracks in the ligaments (the tube sheet material between the tube holes) and the bottom portion of the shell was severely deformed due to excessive heat.

This loss cost the owner of the drycleaning business several thousand dollars for replacement of the boiler and business lost while waiting for the replacement boiler installation. A boiler inspection and jurisdictional certificate would have cost less than $50.

The National Board of Boiler and Pressure Vessel Inspectors has files full of photographs, newsclippings and official reports from serious accidents. Frequently and unfortunately, facilities that use boilers, like drycleaners, are the subject of these accidents. Since drycleaning plants need an adequate supply of steam, all have a boiler of some sort on the premises. Boilers are workhorse devices that sometimes are neglected for years, possibly decades, with no apparent maintenance. This neglect, whether intentional or due to lack of understanding, can have terrible consequences.

Depending on the operation, a drycleaning plant will have one or more boilers under its roof. A drycleaning plant will also contain other pressure vessels such as a typical water heater and an air compressor tank. While these pressure vessels are potentially hazardous and are subject to inspection in most jurisdictions, this article focuses on the boiler.

We all know how a boiler operates. Water is contained within a vessel and is heated by gas, electricity or some other fuel. As the water heats, it creates pressure and steam. Boilers are equipped with devices to control operating pressure, and safety valves that should allow pressure relief when safe operating limits are exceeded. But lack of routine inspection and lack of proper maintenance are widespread.

The National Board reports the following two causes at the top of the 2000 list of incidents*:

 

 

Prevention Through Inspection

In the incident described above, a boiler inspector would have seen the problem and made recommendations to repair the boiler before that fateful morning. Thus, a costly and potentially dangerous accident would have been prevented.

Typically, insurance companies and city, state or provincial governments (jurisdictions) require boiler and pressure vessel inspection on some regular interval. The National Board trains and commissions boiler inspectors who perform both safety inspections and accident investigations. But there are many boiler and pressure vessel system-users who have not had their systems inspected or licensed. It's no surprise that often, the uninspected systems are also poorly maintained.

Everyone Can Help

Perhaps the best route to ensure boiler and pressure vessel safety is to practice installation and maintenance functions that meet both jurisdictional requirements and national standards.

Five preventive steps can help:

 

Each drycleaning plant can establish a simple safety program. For example, look for a certificate of inspection on or near each boiler. The certificate should indicate the number of pounds of pressure under which the system can safely operate. A quick glance at the pressure gage can instantly identify a potential danger.

As part of routine maintenance, open and clean boilers. Test pressure relief valves to make sure they are functioning properly. Move clutter, stored items and combustible substances far away from a boiler, so that overheating of these materials is not possible. Flammable liquids should not be stored in the same area as a boiler. Clean and dust the room that houses the boiler, and prevent nesting or breeding sites for pests.

Whenever you spot a potential problem, call the chief boiler inspector within your jurisdiction. For a listing of chief boiler inspectors, consult the Members page on the National Board Web site. Note the inspection certificate number and the jurisdictional number assigned to the boiler. With these numbers, the chief boiler inspector can determine the boiler's location and any other information necessary to perform an inspection.

If There Is An Accident . . .

During the first minutes on an accident scene, one of the biggest risks with boilers is the high temperatures that may exist. Water or condensate hitting superheated metal can cause instant bursts of steam or further explosions. Also, one breath of superheated steam can damage the lungs and cause permanent breathing problems. If a problem does occur, local emergency personnel, such as firefighters, are your first line of defense. A call to the chief boiler inspector within your jurisdiction will be vital to any accident investigation.

Good preventive maintenance and periodic inspection result in cost savings. Good safety practices make sense in a liability context. Since boilers are an integral part of the drycleaning business, provide the routine maintenance and obtain the periodic inspections that will prevent accidents or problems in the future.

 


 

Editor's note: Some ASME Boiler and Pressure Vessel Code requirements may have changed because of advances in material technology and/or actual experience. The reader is cautioned to refer to the latest edition of the ASME Boiler and Pressure Vessel Code for current requirements.